Somfy Telis 4 Soliris Patio RTS Outdoor Remote w/Sun Sensor Control # 1810645

Somfy

$109.99 
SKU: 1810645

Share:

Somfy Telis 4 Soliris Patio RTS Outdoor Remote w/Sun Sensor Control # 1810645.


FREE SHIPPING



SOMFY OPEN BOX DEALS


Somfy Telis 4 Soloris Patio Water Resistant RTS Transmitter

with Sun Sensor Control

Manufacturer part number # 1811243

Somfy 5 Channel

WATER and Shock Resistant RESISTANT

RTS Remote for use with Somfy RTS motors


Somfy's 5 channel Telis Patio RTS is a convenient hand-held remote controller with sun sensor control.

Reduce heat gain by activating the sun sensor so motorized products automatically adjust based on the sun's intensity.

SUN SENSOR NOT INCLUDED - REMOTE ONLY .


Compatible with

all the Somfy motors featuring Radio Technology Somfy (RTS).


Radio Technology Somfy (RTS) provides compatibility with full range of RTS controls and accessories and allows operation of motorized applications within a range of 65 feet



For indoor or outdoor use.

Ideal for outdoor Patios -  provides water and shock resistance.

ALSO perfect

for Kid's Rooms, Kitchens, and Pool House!



May be personalized for intuitive control of five window covering/devices ,

or five groups of window coverings/devices.



Raise,lower and stop functions.

(open,close, stop)

ALSO Includes

A "My" button that can be custom pre-programmed with your favorite position.


The Telis Collection makes it possible to memorize a "favorite" position.

Pressing the "MY" button on the transmitter automatically sends the device to this position.


Modern contemporary design.

Featuring a new streamline shape and blue rubber edging for increased durability.


Battery powered (no wiring required). Battery Included!


Includes wall mounting knob & hardware for optional hanging of handset anywhere you choose in the room.


Effortlessly adjust awnings, exterior screens or rolling shutters with a simple button press.

Remotely activate and deactive RTS sun sensor to reduce energy consumption. *RTS is omni-directional, so no need to aim the remote at the product being controlled.

Each channel can control an individual motorized product or a group of motorized products which provides practical and flexible control options.

Programming a new remote :


1. With the current remote press the Channel Selector Button. Each channel operates a single window or group of window coverings. LED lights will illuminate, indicating which channel is being operated.


2. Using a paper clip, pen or similar device, press and hold the Programming Button on the back of your current remote until your window shade moves up and down quickly.


3. On the new remote, select a channel to assign the window covering to. Using a paper clip, pen, or similar device, press and hold the Programming Button on the back of the new remote. The window shade will move up and down quickly.


4. The new remote is now programmed to operate your window covering.


Note: repeat process for the other window coverings/channels.


Programming Favorite Position with Remote

The remote operates interior and exteriors shading solutions. Each is operated by a channel.


1. Press the Channel Selector Button. The LED lights will illuminate, indicating which channel is being operated.


2. Use the up  or down buttons to position the shade in your favorite position. Use the  my button to stop the shade when it reaches that position.


3. Press and hold the center button until the window moves up and down quickly. Favorite position is programmed.


4. During normal operation, select the window covering to operate using the channel selector button then press the My button to place window shade in your favorite position


Note: repeat process for the other window coverings/channels


Activating Sun/Wind controls (which requires optional sun/wind sensor).


• The wind sensor is factory set and does not require programming. In order to use Sun/Wind mode, each window covering must be assigned a channel and be paired with the Sun/Wind mode.


1. Using the channel selector button, select the interior or exterior shading solution you wish to operate with the Sun/Wind sensor.


2. Using a paper clip, pen or similar device, press and hold the Programming Button (PROG) on the back of the remote until the interior or exterior shading solution briefly moves up and down.


3. Press and hold the SUN/WIND SELECTOR BUTTON until all LED lights activate.

The lights will change sides and the interior or exterior shading solution will briefly move up and down. When the left side is lit, the interior or exterior shading solution will only react to wind levels.

When the right side is lit, the interior or exterior shading solution will react to both sun and wind levels. Operating the Remote The remote operates interior and exteriors shading solutions.

Each is operated by a channel.


1. Press the Channel Selector Button. The LED lights will illuminate, indicating which channel is being operated.


2. Press the up  button to raise your window covering.


3. Press the down  button to lower your window covering.


4. Press the center  my  button to stop the window covering during operation.



Replacing the Battery

1. Using a small screwdriver, loosen the screws on the reverse side of the remote control and remove the back cover.

2. Replace the battery with one 2430 Lithium 3V battery



PLEASE NOTE :

This REMOTE REQUIRES PROGRAMMING  to link to your motor/device.

It WILL NOT WORK DIRECTLY OUT OF BOX, until you have programmed it.

Programing instructions included, and are also available on Somfy's website.

Video Instructions are available on Somfy's YouTube Channel.



Installation : Optional Wall Bracket & Hardware Included



Lithium  Ion Battery Included.

Voltage : 3 V


Standard Protection Index : IP 30

Working temperature : 0 to + 60 C